Traffic Spikes
Use Speed Bumps with Traffic Spikes to Slow Traffic to Recommended 5 MPH Speed Limit
RB36 Directional traffic controller
Surface Mount Application
This directional spike system is used to control traffic
in one direction. Vehicle may enter, but not exit
without severe tire damage. Spring loaded spikes
remain up and easily go down when vehicles pass
over the system in the correct direction; however, if
passing over it in the opposite (incorrect) direction,
all tires will be sliced.
Surface mounted spike system also serves as a speed bump to slow down the flow of traffic
- - Easily installed to the existing roadway. Bolt or Glue Down
- - No excavating or asphalt cutting is required.
- - Low profile for smooth passage.
- - Fabricated in 3 Ft.sections to customize lane width.
- - All welded construction.
- - 1/4" thick hot rolled steel for "lasting durability".
- - Latch Down Mechanism Included
RB72-3 Directional Traffic Spike Controller
Flush Mount Application
This flush mount directional spike system offers the same features as the surface mount; however, it is designed to sit flush with the road surface. This system is ideal for permanent installations.
System is installed flush with the road surface for a low profile allowing smooth passage.
- - Easily installed in to the existing or newly constructed roadway.
- - Minimal excavating or asphalt cutting is required.
- - Low profile for smooth passage.
- - Fabricated in 3 Ft. sections to customize lane width.
- - 1/2" thick hot rolled steel for lasting durability.
- - Rated for Heavy Duty Axle Loads
- - Latch Down Mechanism Included
Every Traffic Spike Product on this page is Made in the USA!
Automated Spike System
The DKS model 1603 Barrier Gate Operator / Automated Spike System is designed as a modular system allowing for easy flexibility in different applications and easy installation. The 1603 operator is designed with many advanced features and mechanically links the spikes to the barrier arm. The surface mount spikes are easy to install and do not require any trenching or excavating. The 1603 auto-spike system is ideal for parking lots, rental car agencies, schools, car dealerships, government agencies, or in any application where a higher degree of traffic control is preferred.he DKS model 1603 Barrier Gate Operator / Automated Spike System is designed as a modular system allowing for easy flexibility in different applications and easy installation. The 1603 operator is designed with many advanced features and mechanically links the spikes to the barrier arm. The surface mount spikes are easy to install and do not require any trenching or excavating. The 1603 auto-spike system is ideal for parking lots, rental car agencies, schools, car dealerships, government agencies, or in any application where a higher degree of traffic control is preferred.
Traffic control spikes are frequently used to enforce one way traffic in a single traffic lane, such as the entrance or exit to a parking lot.
Discounts are offered. Please call or email for your customized estimate. (520) 780-9751 or email [email protected]
1610 Flush Mount Traffic Spikes
- Individual spring loaded spikes.
- Stainless steel springs.
- Weight spikes (no springs) version available.
- Lock-down version available.
- Flush in-ground unit.
- Painted bright red for easy visibility.
- Ideal to enforce one-way traffic.
- Dimensions: 6.5"H x 12.5"W x 72"L. Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exist.
- Speed bumps should always be used with traffic spikes. Speeds in excess of 5-MPH over the spikes can cause tire damage.
1610 Surface Mount Traffic Spikes
- Spikes sections available in 3-foot sections.
- End caps provide a smooth end to the spike section.
- Torsion springs.
- Lock-down standard.
- Surface mount unit.
- 1/4-inch diamond plate painted bright yellow for easy visibility.
- 3-inch rise provides a built-in speed bump.
- Dimensions: 3"H x 31"W x 36"L. Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exist.
- Speed bumps should always be used with traffic spikes. Speeds in excess of 5-MPH over the spikes can cause tire damage.
Traffic control spikes are ideal for controlling traffic direction and speed through a controlled entry location. Traffic spikes prevent vehicles from proceeding through a traffic lane in the wrong direction by enforcing one-way traffic lanes. Flush mount spikes are available with Spring Retraction or with Weighted Retraction. Speed bumps force drivers to slow down while driving through the controlled entry point. They are also ideal for keeping vehicular traffic at a safe speed while driving over traffic spikes.
Rubber Speed Bump
Motorized Traffic Spikes, Electro-Mechanical Traffic Spikes
Please call (520)780-9751 to order or email a request for price quote
Replacement Stainless Steel Torsion Springs & Stainless Steel Extension Springs for most Brands/Models are available.
It is the end users responsibility to check with local authorities for permission to use traffic spikes for their intended use.
Traffic Spikes have many generic names such as Tiger Teeth, TT-36, TT-72. This directional traffic spike controller is a long time, tried and true design. These models RB36 & RB72-3 are Made in the USA.
Need Replacement Parts for your traffic control spike units? Call (520)780-9751 to order springs or teeth!
1/2" Thick Plate Super Heavy Duty Axle Load Rated
SUPER TOUGH!
2 Sided Reflective 18"X24" Warning Sign
Heavy Gauge Aluminum Insert Surrounded by a Steel Frame and a mounting point for a 2" OD Pipe Post. This sign is highly reflective and requires no power source.
NO POWER REQUIRED - HIGHLY REFLECTIVE
2 Sided Lighted Warning Sign
Warning signs and traffic signals are used with traffic control spikes and auto-spikes to inform drivers that a one way lane condition exist and that proceeding in the wrong direction, or before the spikes are fully retracted, will result in severe tire damage. Warning signs and/or traffic signals should always be used in any traffic control application utilizing traffic control spikes.
- Illuminated with two 20-watt fluorescent lamps.
- 150-watt flood lamp for spike illumination.
- 115 VAC.
- ETL Listed.
- Dimensions: 24"H x 24"W x 8"D.
- Designed to be mounted on 3" mounting pipe (not included).
Copyright © 2013 Secure Lane LLC, All Rights Reserved
Contact the webmaster at: [email protected]
3220 S Dodge Blvd #8 Tucson, AZ 85713
(520)780-9751
This photo shows how reflective the signs are just from a cars headlamps.
What are those spikes in parking lots called? Traffic Control Spikes are known by many names, such as Traffic Spikes, Drive Way Tire Spikes, Tiger Teeth, Tire Spikes, Road Blockers, One Way Traffic Spikes, Parking Lot Spikes, Severe Tire Damage Spikes, Do Not Back Up Spikes, Spike Strips, Tire Killers, Tire Rippers, Tire Shredders, Motorized Traffic Spikes, Directional Traffic Control Spikes, RoadBlade Tire Shredder, Spike Barriers, Tyre Killers, Tiger Teeth, Road Blades, Vehicle Blockers, Tire Spikes, Road Spikes, Parking Lot Tire Spikes, Do Not Back Up Spikes, Do Not Enter Spikes, Tire Poppers, One Way Teeth,and many, many more.
Directional Traffic Control Vehicle Spikes are the best way to enforce and secure a one way traffic lane!
Door King Traffic Spikes
Door King Traffic Spikes
(520)780-9751
Call Christine for a price quote today
Got Snow? We have stainless steel snow melting cables for traffic spikes. Works with surface mounted and in ground spike systems
Highly Reflective Traffic Spike Warning Sign - No Power Required
We Ship to Alabama · Alaska · Arizona · Arkansas · California · Colorado · Connecticut · Delaware · Florida · Georgia · Hawaii · Idaho · Illinois · Indiana · Iowa · Kansas · Kentucky · Louisiana · Maine · Maryland · Massachusetts · Michigan · Minnesota · Mississippi · Missouri · Montana · Nebraska · Nevada · New Hampshire · New Jersey · New Mexico · New York · North Carolina · North Dakota · Ohio · Oklahoma · Oregon · Pennsylvania · Rhode Island · South Carolina · South Dakota · Tennessee · Texas · Utah · Vermont · Virginia · Washington · West Virginia · Wisconsin · Wyoming
Warning Signs for Traffic Spikes
Directional Traffic Control Spikes
RB36 Surface Mounted & RB72-3 In Ground Flush Mounted
Flush Mounted for Smooth Passage
Rubber Recycled Speed Bumps are an affordable way to slow vehicle speeds to a safe and recommended 5 MPH when crossing traffic spike control devices.
Warning Sign Post - Mounting Flange for bolting to surface. No need to dig a post hole and no need for concrete. Bolt to concrete or asphalt.
Powder Coated Red w/ PC Yellow Teeth
→Maximum corrosion protection
→Superior long-term solvent, chemical, and abrasion resistance
→Outstanding impact resistance
Heavy Duty Axle Load Rating
1/2" Steel Plate
Powder Coated Red w/ PC Yellow Teeth
→Maximum corrosion protection
→Superior long-term solvent, chemical, and abrasion resistance
→Outstanding impact resistance
Rubber Speed Bump with yellow stripes & reflective cat eyes
6 Foot Speed Bump (Minimum Order Requirement)
BOLTS SIT BELOW THE SURFACE
Super Thick 1/2" Plate
RB 36 Surface Mounted Traffic Spike Sections
Door King Extension Spring for Spring Loaded Flush Mount Model
Door King Torsion Springs - Left & Right
7/8" ID
7/8" ID
2" ID
Tail is 3-1/2" Long
1/2" OD, Body 1-3/16" Long, Overall Length is 2-1/16"
COBRA™ 1230/12300/1236/12360/12320 Series Extension Spring
Fits Surface Mount Model Spikes 1610-085
Left Spring and a Right Spring needed.
7/8" OD, Body 1-3/4" Long, Overall Length is 3-1/8"
Epoxy to
Asphalt
Concrete
Bolt to
Concrete
RB 72-3 In Ground Traffic Spike Sections
40,000 lbs/20 Tons per Single Axle Load
Fits RB36, RB72 and others
ROAD BLADE TIRE SPIKES
ROAD BLADE TIRE SPIKES - Surface Mounted
ROAD BLADE TIRE SPIKES - In Ground Flush Mounted
Double click here to add text.
Stainless Steel Torsion Spring
Delta Scientific Brand Spikes